New James Hardie Siding for Home in Vancouver - Boss Exteriors

New James Hardie Siding for Home in Vancouver

Tending to and beautifying your home’s exterior is as important as taking care of your home’s interior. One way of doing so is maintaining your siding. A damaged siding will not only look unappealing but it may pose serious harm to your home.

Mold can grow, moisture can cause water damage, and more. In the long run, all of this can lead to even bigger problems. Good siding should properly protect and preserve the inside of your home, so you don’t need to waste money on expensive repairs you could have prevented. This homeowner from Vancouver agrees with us.

BEFORE

AFTER

Preparations for Siding Installation

Here’s what we did for this project. First, we made sure that the surfaces where the sidings will be replaced are all good. We kept the existing 1/11 of the siding to use as underlayment. We then proceeded to inspect sheeting for rot or damage, then replaced the ones that needed to be replaced.

We also installed Vycor Window Wrap on windows and vapor barrier per manufacturer’s specifications. Lastly, for this stage of the process, we installed Hardie trim around windows, doors, corners and Z-metal above windows where needed.

Installing HARDIEPLANK® LAP SIDING CEDARMILL

After all the preparatory steps, we proceed with installing the siding. We used Hardie 8 Inch Cedarmill siding per manufacturer’s specifications. To add to that, we also installed two Hardie Shingle Straight Edge Panels on 3 peaks.

To finish off the new sidings, we applied two coats of Sherwin William's Super Paint. Once everything’s done, our crew cleaned up and disposed of all the job related debris and materials.

For a foolproof solution to your current roofing and siding problems, Boss Exteriors has got you covered. Call us now at 503-732-7663, and we will make sure you get the best roofing services you deserve.

Gabriel Callaway
 

Before Boss Exteriors, Gabe had his first company Callaway Construction Company for about 8 years. He started out of necessity to provide for himself and his family. Being self-taught, he was running everything solo for a couple of years in the beginning, and was doing all sorts of services. From flipping homes and doing all kinds of interior remodelling and contractor work, he recently shifted gears completely and niched down mostly to roofing, which is what Boss Exteriors is now. Channeling all his experience in being a general contractor for almost 10 years, he's now funnelling his expertise into the mastery of roofing to give customers an even better service and experience.